Resin-bound driveways, from base to finish.
Decorative aggregate surfacing with the base, borders and drainage considered together. LMT Groundworks serves Tewkesbury, Cheltenham and the surrounding towns and villages.
Choose the full installation, not just the colour.
Resin-bound surfacing combines aggregate and resin before the mixture is laid to form a stone finish. It can be used for driveways and paths, with borders and aggregate tones chosen to suit the setting. The appearance is important, but it should be considered alongside the condition of the supporting construction and how the area will be used.
LMT Groundworks can assess an existing entrance or discuss resin as part of a replacement driveway. Bring photographs of the current surface, standing water, edges and adjoining paths to the initial conversation. The existing LMT project gallery shows completed finishes across the service area. Use it to describe the tones, borders and details you would like to discuss.
- Tewkesbury-based team
- 25+ years’ experience
- Preparation and installation
- Free no-obligation quotations
Resin-bound and resin-bonded are different systems
The terms are sometimes used interchangeably in enquiries, but they describe different ways of using aggregate and resin. In a resin-bound system the stones are mixed with resin before laying. Resin-bonded surfacing instead has aggregate scattered onto a resin layer. Ask which system a quotation covers rather than relying on the word resin alone.
Resin-bound surfacing can allow water through the surface. That does not mean every existing base or complete driveway is permeable. The layers beneath it and the route for the water need to be suitable. Discuss the whole build-up and drainage approach, not simply a claim about the top layer.
Can the existing driveway base stay?
An existing tarmac or concrete surface should be assessed, not assumed suitable because it looks solid. Movement, cracking, poor edges and areas holding water can affect the proposal. Finishing heights need checking at doors, garages, covers and paths before a new surface is specified.
A quotation should distinguish any retained construction from work to be removed or rebuilt. Ask how the borders, inspection covers and drainage details will be treated. This makes it easier to compare a surface-only proposal with one that includes substantial preparation, rather than comparing two different jobs as though they were identical.
- Condition and stability of the supporting base
- Finished levels and thresholds
- A suitable water route through the complete construction
Aggregate, borders and the overall layout
Colour and aggregate choice affect the appearance of a large area differently from a small sample. Compare the proposed tone with the house, paving and boundary materials, and think about the view from the road as well as the front door. The team can discuss the options available for the project.
Borders can define parking, provide a change of material beside a path or frame the entrance. Include any steps, side access and adjoining patio in the brief so that the transition is planned. A decorative finish should still leave practical room for opening vehicle doors, bins and a clear walking route.
What affects a resin driveway quotation?
The size and shape of the space, chosen aggregate, access and required base work influence the installation. Removal of the old surface, new borders, covers and drainage details can change the scope considerably. Ask which of these are included and which existing features will remain.
Photographs and approximate dimensions help start the discussion, but the site assessment informs the quotation. Explain when the drive must be accessible and whether deliveries or garden work share the same route. Material and weather conditions can influence scheduling, so programme and handover arrangements should be discussed for the actual job rather than promised from a photograph alone.
Care, use and questions to ask at handover
Ask when pedestrians and vehicles can use the finished area and follow the instructions for the system installed. Keep the surface and drainage routes clear of debris, and obtain cleaning advice before using chemicals or aggressive equipment. A stone finish is not a reason to assume every cleaning product is suitable.
If an older resin area is damaged, photographs of the affected part and its edges help explain the problem. An assessment should consider the underlying condition and whether a local repair is practical. A repair to an existing decorative surface may not blend invisibly, so discuss the likely finish rather than expecting an automatic colour match.
Is resin-bound the right finish for your entrance?
Compare a decorative aggregate finish with tarmac or block paving, including preparation, borders, the proposed drainage arrangement and maintenance expectations.
Resin-bound driveway questions.
Is resin-bound surfacing the same as resin-bonded?
No. Resin-bound surfacing mixes aggregate with resin before laying. Resin-bonded surfacing has aggregate scattered onto a resin layer. The systems differ, including their drainage characteristics, so the quotation should identify the system being proposed.
Will a resin-bound driveway always drain through the base?
Not automatically. The surface can be porous, but the supporting layers and water route must also be suitable. Existing construction needs assessing before describing the complete installation as permeable.
Can resin be laid over my existing concrete or tarmac?
The existing surface and base need a site assessment. Stability, cracks, levels, edges and drainage can affect suitability. A retained base and a replacement construction are different scopes and should be identified clearly in the quotation.
Can I choose the aggregate colour and border?
The available aggregate and border choices can be discussed for your project. Consider their appearance with the house, existing paths and adjoining paving. Explain any features you want to retain before the overall layout is agreed.
How do I get a resin driveway installation quote?
Contact LMT Groundworks on 07387947963 or use the enquiry form. Include the postcode, approximate size and photographs of the existing entrance, edges and any damage or standing water. LMT offers free, no-obligation quotations.
Based in Tewkesbury, covering the surrounding areas.
Explore the preparation and project advice for your location, including Cheltenham, Gloucestershire, Worcestershire and nearby Warwickshire communities. Choose your area for local project-planning information and quotation details.
Plan a resin-bound driveway with LMT.
Send the postcode, approximate area and photographs of the existing space to start the conversation.